How to disassemble a concrete plant?

May 17, 2018

Working conditions for disassembling a concrete plant:
First of all, check all the safety tools are perfect, and then clean up the construction site, leaving enough space.
Then clean up the residue in the batching machine and cement silo. When cleaning, pay attention to cut off the auxiliary facilities such as water, gas, and electricity, and remove the pipelines of electrical, water, admixture, compressed air and so on.
Gradually start disassembling batching plant as follows:
1, Remove the peripheral board of batching layer, mixing layer .
2. Dismantle the overall structure of roof and truss on the feed layer.
3. Remove the screw conveyor and the mechanical part of belt conveyor head and the tape machine truss (before removing the mechanical parts, disassemble the accessories first such as rollers).
4. Remove all mechanical equipment platforms for the batching layer.
5. Remove the upper rack, control room and control room bracket.
6. Dismantle the hopper and mixer and the corresponding stairs on the mixing platform.
7, Remove the stirring layer platform and the following stairs, columns and so on.
8, Remove the aggregate hopper and the following mechanical equipment into parts.
9. Remove the cement silo and all facilities, and then remove the frames underneath cement silo.

After cleaning up above parts, inventory of these devices is performed to ensure that the equipment is complete and intact. These work should be attended by professional personnel.